Hi folks, trying to set up an iqaudio Pi-CodecZero as described by Udo some days ago. Device seems to be loaded with lsmod | grep iqaudio and is seen at arecord -l On boot, the pi zero starts up, I can see streambox.local, then the stream comes up, is clikable on the map, but fails after a few min. is there another step required for the darkice.cfg that needs to be set? Do i need to set the device in darkice.cfg - device = hw:IQaudIOCODEC ? everytime I try and edit darkice.cfg, the system resets the file. where can i make this change if in fact it needs to be set? I get a 404 on http://locus.creacast.com:9001/cork_st._luke_s.ogg%C2%A0which seems to suggest a darkice misconfig... * streambox-darkice.service - Locusonus Streambox Live Stream Loaded: loaded (/usr/lib/systemd/system/streambox-darkice.service; enabled; vendor preset: disabled) Active: active (running) since Wed 2020-05-06 12:59:10 UTC; 434ms ago Process: 4950 ExecStartPre=/home/locusonus/bin/audio.sh --setup (code=exited, status=0/SUCCESS) Process: 4961 ExecStartPost=/usr/bin/sleep 7 (code=exited, status=0/SUCCESS) Main PID: 4960 (darkice.sh) Tasks: 3 (limit: 987) Memory: 1.4M CGroup: /system.slice/streambox-darkice.service |-4960 /usr/bin/sh /home/locusonus/bin/darkice.sh `-4977 /usr/bin/darkice -c /boot/darkice.cfg May 06 12:59:02 streambox systemd[1]: Starting Locusonus Streambox Live Stream...May 06 12:59:03 streambox darkice.sh[4960]: Local ip address: 192.168.1.79May 06 12:59:03 streambox darkice.sh[4960]: Download darkice config for 'oootinistream'May 06 12:59:03 streambox darkice.sh[4964]: [159B blob data]May 06 12:59:03 streambox darkice.sh[4977]: DarkIce 1.2 live audio streamer, http://code.google.com/p/darkice/May 06 12:59:03 streambox darkice.sh[4977]: Copyright (c) 2000-2007, Tyrell Hungary, http://tyrell.hu/May 06 12:59:03 streambox darkice.sh[4977]: Copyright (c) 2008-2013, Akos Maroy and Rafael DinizMay 06 12:59:03 streambox darkice.sh[4977]: This is free software, and you are welcome to redistribute itMay 06 12:59:03 streambox darkice.sh[4977]: under the terms of The GNU General Public License version 3 orMay 06 12:59:03 streambox darkice.sh[4977]: any later version.May 06 12:59:03 streambox darkice.sh[4977]: Using config file: /boot/darkice.cfgMay 06 12:59:03 streambox darkice.sh[4977]: Using ALSA DSP input device: plughw:0,0May 06 12:59:03 streambox darkice.sh[4977]: Using POSIX real-time scheduling, priority 3May 06 12:59:10 streambox systemd[1]: Started Locusonus Streambox Live Stream.
* streambox-darkice.service - Locusonus Streambox Live Stream Loaded: loaded (/usr/lib/systemd/system/streambox-darkice.service; enabled; vendor preset: disabled) Active: activating (auto-restart) (Result: exit-code) since Wed 2020-05-06 13:04:17 UTC; 6s ago Process: 5493 ExecStartPre=/home/locusonus/bin/audio.sh --setup (code=exited, status=0/SUCCESS) Process: 5503 ExecStart=/home/locusonus/bin/darkice.sh (code=exited, status=255/EXCEPTION) Process: 5504 ExecStartPost=/usr/bin/sleep 7 (code=exited, status=0/SUCCESS) Main PID: 5503 (code=exited, status=255/EXCEPTION)
Hi aid, since I spend some hours to get it working I'll try to help you.
maybe you can post your darkice.cfg?
Do i need to set the device in darkice.cfg - device = hw:IQaudIOCODEC ?
I use device = hw:nameOfYourDevice, the explicit name you'll find with /cat /proc/asound/cards/ (the one in [], as it is). This prevents darkice not to find it if the system decides to change hw:0 to hw:1 for example.
everytime I try and edit darkice.cfg, the system resets the file. where can i make this change
if in fact it needs to be set?
I noticed the same. I use /darkice -c /RelPathToACopyOfYour/darkice.cfg /and it doesn't overwrite it.
rph-r
Le 06.05.20 à 15:12, aid a écrit :
Hi folks,
trying to set up an iqaudio Pi-CodecZero as described by Udo some days ago. Device seems to be loaded with lsmod | grep iqaudio and is seen at arecord -l
On boot, the pi zero starts up, I can see streambox.local, then the stream comes up, is clikable on the map, but fails after a few min. is there another step required for the darkice.cfg that needs to be set? Do i need to set the device in darkice.cfg - device = hw:IQaudIOCODEC ?
everytime I try and edit darkice.cfg, the system resets the file. where can i make this change if in fact it needs to be set?
I get a 404 on http://locus.creacast.com:9001/cork_st._luke_s.ogg%C2%A0which seems to suggest a darkice misconfig...
- streambox-darkice.service - Locusonus Streambox Live Stream
Loaded: loaded (/usr/lib/systemd/system/streambox-darkice.service; enabled; vendor preset: disabled) Active: active (running) since Wed 2020-05-06 12:59:10 UTC; 434ms ago Process: 4950 ExecStartPre=/home/locusonus/bin/audio.sh --setup (code=exited, status=0/SUCCESS) Process: 4961 ExecStartPost=/usr/bin/sleep 7 (code=exited, status=0/SUCCESS) Main PID: 4960 (darkice.sh) Tasks: 3 (limit: 987) Memory: 1.4M CGroup: /system.slice/streambox-darkice.service |-4960 /usr/bin/sh /home/locusonus/bin/darkice.sh `-4977 /usr/bin/darkice -c /boot/darkice.cfg
May 06 12:59:02 streambox systemd[1]: Starting Locusonus Streambox Live Stream... May 06 12:59:03 streambox darkice.sh[4960]: Local ip address: 192.168.1.79 May 06 12:59:03 streambox darkice.sh[4960]: Download darkice config for 'oootinistream' May 06 12:59:03 streambox darkice.sh[4964]: [159B blob data] May 06 12:59:03 streambox darkice.sh[4977]: DarkIce 1.2 live audio streamer, http://code.google.com/p/darkice/ May 06 12:59:03 streambox darkice.sh[4977]: Copyright (c) 2000-2007, Tyrell Hungary, http://tyrell.hu/ May 06 12:59:03 streambox darkice.sh[4977]: Copyright (c) 2008-2013, Akos Maroy and Rafael Diniz May 06 12:59:03 streambox darkice.sh[4977]: This is free software, and you are welcome to redistribute it May 06 12:59:03 streambox darkice.sh[4977]: under the terms of The GNU General Public License version 3 or May 06 12:59:03 streambox darkice.sh[4977]: any later version. May 06 12:59:03 streambox darkice.sh[4977]: Using config file: /boot/darkice.cfg May 06 12:59:03 streambox darkice.sh[4977]: Using ALSA DSP input device: plughw:0,0 May 06 12:59:03 streambox darkice.sh[4977]: Using POSIX real-time scheduling, priority 3 May 06 12:59:10 streambox systemd[1]: Started Locusonus Streambox Live Stream.
- streambox-darkice.service - Locusonus Streambox Live Stream
Loaded: loaded (/usr/lib/systemd/system/streambox-darkice.service; enabled; vendor preset: disabled) Active: activating (auto-restart) (Result: exit-code) since Wed 2020-05-06 13:04:17 UTC; 6s ago Process: 5493 ExecStartPre=/home/locusonus/bin/audio.sh --setup (code=exited, status=0/SUCCESS) Process: 5503 ExecStart=/home/locusonus/bin/darkice.sh (code=exited, status=255/EXCEPTION) Process: 5504 ExecStartPost=/usr/bin/sleep 7 (code=exited, status=0/SUCCESS) Main PID: 5503 (code=exited, status=255/EXCEPTION)
Locustream / Locus Sonus Streaming Project http://locusonus.org/ To unsubscribe, send a message to locustream-request@nujus.net with unsubscribe in the subject or the message http://nujus.net/cgi-bin/mailman/listinfo/locustream _______________________________________________
Please unsubscribe me from this list.
Happy streaming everyone. ________________________________ From: Locustream locustream-bounces@nujus.net on behalf of Raphael Raccuia rafael.raccuia@blindekinder.com Sent: Wednesday, May 6, 2020 10:02 AM To: locustream@locusonus.org locustream@locusonus.org Subject: Re: [locustream] config for iqAudio Pi-CodecZero
Hi aid, since I spend some hours to get it working I'll try to help you.
maybe you can post your darkice.cfg?
Do i need to set the device in darkice.cfg - device = hw:IQaudIOCODEC ?
I use device = hw:nameOfYourDevice, the explicit name you'll find with cat /proc/asound/cards (the one in [], as it is). This prevents darkice not to find it if the system decides to change hw:0 to hw:1 for example.
everytime I try and edit darkice.cfg, the system resets the file. where can i make this change if in fact it needs to be set?
I noticed the same. I use darkice -c /RelPathToACopyOfYour/darkice.cfg and it doesn't overwrite it.
rph-r
Le 06.05.20 à 15:12, aid a écrit : Hi folks,
trying to set up an iqaudio Pi-CodecZero as described by Udo some days ago. Device seems to be loaded with lsmod | grep iqaudio and is seen at arecord -l
On boot, the pi zero starts up, I can see streambox.local, then the stream comes up, is clikable on the map, but fails after a few min. is there another step required for the darkice.cfg that needs to be set? Do i need to set the device in darkice.cfg - device = hw:IQaudIOCODEC ?
everytime I try and edit darkice.cfg, the system resets the file. where can i make this change if in fact it needs to be set?
I get a 404 on http://locus.creacast.com:9001/cork_st._luke_s.ogghttp://secure-web.cisco.com/12f5mEW22J1zkPjG6t24Wvf5a9bqXD0-ZXKghwHBqqqeLHDmEJQYurZ5xiK_VLylbu1MWZdAux-t_2pdDtDyzGpf2fZ76Lfh-P85_5bCX280y4j0eB3F6Jo3xvRH6ZkuNuLScvYL9GKFzNHyi26D1fDgsWpCdIVaRE5H_v7LTbPCeuTZLW9pL6bWSDF3ozt14iSZzRrUmLa0_KCT6RD1PSVkZAiu1f8NTwYzUhfvb1comjeDSxmbzXIOmuYc7QDpyv-paeaiH3HhTRNMSjxetL28QFbFR2ESJxlrGvZkJMBtqGMJNP2BIzS_zwihoCLQE-Udh7-6qmZ3D-r-JdHSJDoeVsU8Wv8fcb1sUEDlH-KzoqxyQeneWz7XIg8OTp8Jj9Ppwtukdolcsu4JGAyxgtPu5ydPpqSkdTH319gzO9FrVzir3W6DajzmTBFeVGT4G/http%3A%2F%2Flocus.creacast.com%3A9001%2Fcork_st._luke_s.ogg which seems to suggest a darkice misconfig...
* streambox-darkice.service - Locusonus Streambox Live Stream Loaded: loaded (/usr/lib/systemd/system/streambox-darkice.service; enabled; vendor preset: disabled) Active: active (running) since Wed 2020-05-06 12:59:10 UTC; 434ms ago Process: 4950 ExecStartPre=/home/locusonus/bin/audio.sh --setup (code=exited, status=0/SUCCESS) Process: 4961 ExecStartPost=/usr/bin/sleep 7 (code=exited, status=0/SUCCESS) Main PID: 4960 (darkice.sh) Tasks: 3 (limit: 987) Memory: 1.4M CGroup: /system.slice/streambox-darkice.service |-4960 /usr/bin/sh /home/locusonus/bin/darkice.sh `-4977 /usr/bin/darkice -c /boot/darkice.cfg
May 06 12:59:02 streambox systemd[1]: Starting Locusonus Streambox Live Stream... May 06 12:59:03 streambox darkice.sh[4960]: Local ip address: 192.168.1.79 May 06 12:59:03 streambox darkice.sh[4960]: Download darkice config for 'oootinistream' May 06 12:59:03 streambox darkice.sh[4964]: [159B blob data] May 06 12:59:03 streambox darkice.sh[4977]: DarkIce 1.2 live audio streamer, http://code.google.com/p/darkice/http://secure-web.cisco.com/1CpVG_SeqAvWOsf3fyhGktwCSF1nUabqaE4DSU0ZswCU81bN37WXh5_6TfHwfx2FVbGymI3YKmx5AE6aW3CA7-cOwgLEsIZ0cVACDpk0l2fCa-4riiXY9K-OqXxCJY7b_rflM2PWETo8VP_vDIDno56AICww02lGhMoiKsja-m14CmXfXfghGKrm7Csft3pIETC50c6JX12LhQVNh9JYpvSaDeKy4O55YggxLeFhK4i3Woe4aMW2kNU3O76_bXrOfL15N_b7trst2LGBw_UyohmTuV5pSGzoiR0vNttSQxrNsm8rB-PUd4Bkx0wpaB1L09MgIk9KBwwIVHgTASfHnLNZ21cPNcoSuWOjv6ue_DqpIvgFse2xOGJ5KJDHj2lnE1X2fgzGZXelKDclKUb_aoRDysIuhIPO-vKqa_usTYG6kBcG299MrByrVoByE3RZH/http%3A%2F%2Fcode.google.com%2Fp%2Fdarkice%2F May 06 12:59:03 streambox darkice.sh[4977]: Copyright (c) 2000-2007, Tyrell Hungary, http://tyrell.hu/http://secure-web.cisco.com/1N71IpPFqyJ61C5RMGrmZ_nMjkR552lEHSm8-ZEZXaVQNIBC1X4ldSLL_t_2v2UHRWJEFi189ZMLTv8Ra6D59fXhVSJaQp4grRgzv2_P65N14i4P1tDI3Na-5L8Vh0nI1d1RZ2Q_h0YekCHNFiyWglHiEIdmnj_2Nh9TgM5gy7lMv7wflUH_wLD1FciFwE_nQwQdBzQGuQoq6gRTHfnBNV9QeDzBA08dX7nlrZM4qAgRNBeUN16nteP5rcNy34v_UJiBD_xK_q_qe6mCdLFg1TtG-71RpBpS7KZ-3-i4tgooOv2X4dfjhcdjl_lIquuxVHGktzJJ9qAChLrnv7sPJBlIhK_tDxAFRCVjB3zdseflt0_pF50SBg8QljWttOotxqIu-4ZLLPpqz-V_dSvCBMQd2aaqcSByoMgbLypUuAXRYIOoQ7bB9ScoW1lpToyrw/http%3A%2F%2Ftyrell.hu%2F May 06 12:59:03 streambox darkice.sh[4977]: Copyright (c) 2008-2013, Akos Maroy and Rafael Diniz May 06 12:59:03 streambox darkice.sh[4977]: This is free software, and you are welcome to redistribute it May 06 12:59:03 streambox darkice.sh[4977]: under the terms of The GNU General Public License version 3 or May 06 12:59:03 streambox darkice.sh[4977]: any later version. May 06 12:59:03 streambox darkice.sh[4977]: Using config file: /boot/darkice.cfg May 06 12:59:03 streambox darkice.sh[4977]: Using ALSA DSP input device: plughw:0,0 May 06 12:59:03 streambox darkice.sh[4977]: Using POSIX real-time scheduling, priority 3 May 06 12:59:10 streambox systemd[1]: Started Locusonus Streambox Live Stream.
* streambox-darkice.service - Locusonus Streambox Live Stream Loaded: loaded (/usr/lib/systemd/system/streambox-darkice.service; enabled; vendor preset: disabled) Active: activating (auto-restart) (Result: exit-code) since Wed 2020-05-06 13:04:17 UTC; 6s ago Process: 5493 ExecStartPre=/home/locusonus/bin/audio.sh --setup (code=exited, status=0/SUCCESS) Process: 5503 ExecStart=/home/locusonus/bin/darkice.sh (code=exited, status=255/EXCEPTION) Process: 5504 ExecStartPost=/usr/bin/sleep 7 (code=exited, status=0/SUCCESS) Main PID: 5503 (code=exited, status=255/EXCEPTION)
_______________________________________________ Locustream / Locus Sonus Streaming Project http://locusonus.org/http://secure-web.cisco.com/1d4qUziRsmZhKscfNt7FiO1t_boB3OM5U7Y8pCwbQ8he18ZIks6LjW17cIcl30h5DONxWCxxG01mM0u8CG0J3sLPToZArDF4j9wLNaOLCYNdQi2Y158D1QoMMRAKk0blAmeO8Na0ThHQyTjAZWIoEt05qxbBMzvLZ8QHF0oDhEOE9D3mzPd54WsgjLJmN_p4eVv0GTNb2RypoZaQsuD56fmvp1zVyXPVZFZzT1H1Z5-U6C_FQHXkv-1BoAsH-rrJCdZOPb9doBhZi3uHV_C2HSj7n92a4A5z4_049jC-UNtiBiGzJ0IjePrHGj_Ekq9RXG8nImehq-RWmt0Z9CbkMXapb2pTDCuKRoisyKQciyaynClh9RpCvvAgVz7iQt5lBqcThDbTqgWX1g2qya6A8dp_x1k4RxevcO2UI4kbz4DnFxUZHa3vKeRiY32ptPwnS/http%3A%2F%2Flocusonus.org%2F To unsubscribe, send a message to locustream-request@nujus.netmailto:locustream-request@nujus.net with unsubscribe in the subject or the message http://nujus.net/cgi-bin/mailman/listinfo/locustreamhttp://secure-web.cisco.com/1B3H80pvscjNXdElMvu3Xrm43jXS788qLJXbiGJKpuBtoKWegnmrH6c3fWjw2TPqGHcUmLr82cX0fwaPYG9rKgw1WPFehep9e8GO0AOq5v8O6eeSmPHNQhTg-FD_LH-5jPR-jd2C7NE6IP6KHA7z7iV99VRkG5QRtfoC-sivDWdLulZaWYkBcfa9W1y0loSUmNRB1M1PIuMmCtVOv-HFpgaa3-e-vmnjnh2vyjK-TRN4cWb0ms0mYUNOgGPK6_winil1NH4ZQjVL57iNcnFD1n78O8P3KEkioEBJobxqZlRXTLXZsIuXkQSR3WpgvzfpR_p3-zzwRnC33g2sdNvxx1ymx1vmFu5Y2JyLJJ8toefB6zP1yS3U8_8kRodCbMGhAhX9hSZHHuUcuuacAEHzzUcBGhFO0oCXBW5vS2fJwskuJabM9obMwJc_Z21o2cnek/http%3A%2F%2Fnujus.net%2Fcgi-bin%2Fmailman%2Flistinfo%2Flocustream _______________________________________________
For anyone interested, i was able to get the iqaudio Pi-CodecZero card working with an rpi zero w after running the stereo mic script here: iqaudio/Pi-Codec Using a stereo pair microUsi, still hearing wifi noise with the iqaudio card mounted directly on top of the zero. There are a number of alsamixer settings to play with, so maybe the wifi noise can be eliminated there. Also I'm testing this beside a mess of synths and electricty so maybe i need to move the streambox somewhere less noisy. to bring up the box was as follows: changed in /boot/config.txt: #dtparam=audio=on dtoverlay=iqaudio-codec
then, copy the IQaudIO_Codec_StereoMIC_record_and_HP_playback.state file to the streambox, ssh and sudo alsactl --file /home/locusonus/IQaudIO_Codec_StereoMIC_record_and_HP_playback.state restoresudo alsactl store will report if I can resolve the wifi noise issue.
| | | | | |
|
| | | | iqaudio/Pi-Codec
Tools for the IQaudIO Pi-Codec / CodecZero sound cards - iqaudio/Pi-Codec |
|
|
On Wednesday, 6 May 2020, 14:12:38 BST, aid oootini@yahoo.com wrote:
Hi folks, trying to set up an iqaudio Pi-CodecZero as described by Udo some days ago. Device seems to be loaded with lsmod | grep iqaudio and is seen at arecord -l On boot, the pi zero starts up, I can see streambox.local, then the stream comes up, is clikable on the map, but fails after a few min. is there another step required for the darkice.cfg that needs to be set? Do i need to set the device in darkice.cfg - device = hw:IQaudIOCODEC ? everytime I try and edit darkice.cfg, the system resets the file. where can i make this change if in fact it needs to be set? I get a 404 on http://locus.creacast.com:9001/cork_st._luke_s.ogg%C2%A0which seems to suggest a darkice misconfig... * streambox-darkice.service - Locusonus Streambox Live Stream Loaded: loaded (/usr/lib/systemd/system/streambox-darkice.service; enabled; vendor preset: disabled) Active: active (running) since Wed 2020-05-06 12:59:10 UTC; 434ms ago Process: 4950 ExecStartPre=/home/locusonus/bin/audio.sh --setup (code=exited, status=0/SUCCESS) Process: 4961 ExecStartPost=/usr/bin/sleep 7 (code=exited, status=0/SUCCESS) Main PID: 4960 (darkice.sh) Tasks: 3 (limit: 987) Memory: 1.4M CGroup: /system.slice/streambox-darkice.service |-4960 /usr/bin/sh /home/locusonus/bin/darkice.sh `-4977 /usr/bin/darkice -c /boot/darkice.cfg May 06 12:59:02 streambox systemd[1]: Starting Locusonus Streambox Live Stream...May 06 12:59:03 streambox darkice.sh[4960]: Local ip address: 192.168.1.79May 06 12:59:03 streambox darkice.sh[4960]: Download darkice config for 'oootinistream'May 06 12:59:03 streambox darkice.sh[4964]: [159B blob data]May 06 12:59:03 streambox darkice.sh[4977]: DarkIce 1.2 live audio streamer, http://code.google.com/p/darkice/May 06 12:59:03 streambox darkice.sh[4977]: Copyright (c) 2000-2007, Tyrell Hungary, http://tyrell.hu/May 06 12:59:03 streambox darkice.sh[4977]: Copyright (c) 2008-2013, Akos Maroy and Rafael DinizMay 06 12:59:03 streambox darkice.sh[4977]: This is free software, and you are welcome to redistribute itMay 06 12:59:03 streambox darkice.sh[4977]: under the terms of The GNU General Public License version 3 orMay 06 12:59:03 streambox darkice.sh[4977]: any later version.May 06 12:59:03 streambox darkice.sh[4977]: Using config file: /boot/darkice.cfgMay 06 12:59:03 streambox darkice.sh[4977]: Using ALSA DSP input device: plughw:0,0May 06 12:59:03 streambox darkice.sh[4977]: Using POSIX real-time scheduling, priority 3May 06 12:59:10 streambox systemd[1]: Started Locusonus Streambox Live Stream.
* streambox-darkice.service - Locusonus Streambox Live Stream Loaded: loaded (/usr/lib/systemd/system/streambox-darkice.service; enabled; vendor preset: disabled) Active: activating (auto-restart) (Result: exit-code) since Wed 2020-05-06 13:04:17 UTC; 6s ago Process: 5493 ExecStartPre=/home/locusonus/bin/audio.sh --setup (code=exited, status=0/SUCCESS) Process: 5503 ExecStart=/home/locusonus/bin/darkice.sh (code=exited, status=255/EXCEPTION) Process: 5504 ExecStartPost=/usr/bin/sleep 7 (code=exited, status=0/SUCCESS) Main PID: 5503 (code=exited, status=255/EXCEPTION)
OK, last one, and sorry for the spam. excited to get this working. wifi noise totally eliminated by setting the mic mux inputs to Mic 1 Amp Source MUX [MIC_P] and Mic 2 Amp Source MUX [MIC_N]. my alsamixer state with this configuration is attached below. Run it with sudo alsactl restore -f stereo_mic_config.state On Thursday, 7 May 2020, 00:11:01 BST, aid oootini@yahoo.com wrote:
For anyone interested, i was able to get the iqaudio Pi-CodecZero card working with an rpi zero w after running the stereo mic script here: iqaudio/Pi-Codec Using a stereo pair microUsi, still hearing wifi noise with the iqaudio card mounted directly on top of the zero. There are a number of alsamixer settings to play with, so maybe the wifi noise can be eliminated there. Also I'm testing this beside a mess of synths and electricty so maybe i need to move the streambox somewhere less noisy. to bring up the box was as follows: changed in /boot/config.txt: #dtparam=audio=on dtoverlay=iqaudio-codec
then, copy the IQaudIO_Codec_StereoMIC_record_and_HP_playback.state file to the streambox, ssh and sudo alsactl --file /home/locusonus/IQaudIO_Codec_StereoMIC_record_and_HP_playback.state restoresudo alsactl store will report if I can resolve the wifi noise issue.
| | | | | |
|
| | | | iqaudio/Pi-Codec
Tools for the IQaudIO Pi-Codec / CodecZero sound cards - iqaudio/Pi-Codec |
|
|
On Wednesday, 6 May 2020, 14:12:38 BST, aid oootini@yahoo.com wrote:
Hi folks, trying to set up an iqaudio Pi-CodecZero as described by Udo some days ago. Device seems to be loaded with lsmod | grep iqaudio and is seen at arecord -l On boot, the pi zero starts up, I can see streambox.local, then the stream comes up, is clikable on the map, but fails after a few min. is there another step required for the darkice.cfg that needs to be set? Do i need to set the device in darkice.cfg - device = hw:IQaudIOCODEC ? everytime I try and edit darkice.cfg, the system resets the file. where can i make this change if in fact it needs to be set? I get a 404 on http://locus.creacast.com:9001/cork_st._luke_s.ogg%C2%A0which seems to suggest a darkice misconfig... * streambox-darkice.service - Locusonus Streambox Live Stream Loaded: loaded (/usr/lib/systemd/system/streambox-darkice.service; enabled; vendor preset: disabled) Active: active (running) since Wed 2020-05-06 12:59:10 UTC; 434ms ago Process: 4950 ExecStartPre=/home/locusonus/bin/audio.sh --setup (code=exited, status=0/SUCCESS) Process: 4961 ExecStartPost=/usr/bin/sleep 7 (code=exited, status=0/SUCCESS) Main PID: 4960 (darkice.sh) Tasks: 3 (limit: 987) Memory: 1.4M CGroup: /system.slice/streambox-darkice.service |-4960 /usr/bin/sh /home/locusonus/bin/darkice.sh `-4977 /usr/bin/darkice -c /boot/darkice.cfg May 06 12:59:02 streambox systemd[1]: Starting Locusonus Streambox Live Stream...May 06 12:59:03 streambox darkice.sh[4960]: Local ip address: 192.168.1.79May 06 12:59:03 streambox darkice.sh[4960]: Download darkice config for 'oootinistream'May 06 12:59:03 streambox darkice.sh[4964]: [159B blob data]May 06 12:59:03 streambox darkice.sh[4977]: DarkIce 1.2 live audio streamer, http://code.google.com/p/darkice/May 06 12:59:03 streambox darkice.sh[4977]: Copyright (c) 2000-2007, Tyrell Hungary, http://tyrell.hu/May 06 12:59:03 streambox darkice.sh[4977]: Copyright (c) 2008-2013, Akos Maroy and Rafael DinizMay 06 12:59:03 streambox darkice.sh[4977]: This is free software, and you are welcome to redistribute itMay 06 12:59:03 streambox darkice.sh[4977]: under the terms of The GNU General Public License version 3 orMay 06 12:59:03 streambox darkice.sh[4977]: any later version.May 06 12:59:03 streambox darkice.sh[4977]: Using config file: /boot/darkice.cfgMay 06 12:59:03 streambox darkice.sh[4977]: Using ALSA DSP input device: plughw:0,0May 06 12:59:03 streambox darkice.sh[4977]: Using POSIX real-time scheduling, priority 3May 06 12:59:10 streambox systemd[1]: Started Locusonus Streambox Live Stream.
* streambox-darkice.service - Locusonus Streambox Live Stream Loaded: loaded (/usr/lib/systemd/system/streambox-darkice.service; enabled; vendor preset: disabled) Active: activating (auto-restart) (Result: exit-code) since Wed 2020-05-06 13:04:17 UTC; 6s ago Process: 5493 ExecStartPre=/home/locusonus/bin/audio.sh --setup (code=exited, status=0/SUCCESS) Process: 5503 ExecStart=/home/locusonus/bin/darkice.sh (code=exited, status=255/EXCEPTION) Process: 5504 ExecStartPost=/usr/bin/sleep 7 (code=exited, status=0/SUCCESS) Main PID: 5503 (code=exited, status=255/EXCEPTION)
aid:
OK, last one, and sorry for the spam. excited to get this working. wifi noise totally eliminated by setting the mic mux inputs to Mic 1 Amp Source MUX [MIC_P] and Mic 2 Amp Source MUX [MIC_N]. my alsamixer state with this configuration is attached below. Run it with sudo alsactl restore -f stereo_mic_config.state
;-)
this imbalance (mic_p vs. mic_n) is the reason, why iqaudio do not advertise this card as stereo. It's the same on the iqaudio codec+ card.
btw: I'm currently testing a pi zero /w iqaudio zero + stereo mics on a usb battery. we're hitting a full day soon and there seems plenty of capacity left.
bests. udo
-- radio aporee 52° 29' 66" N, 13° 25' 26" E ::: maps https://aporee.org/maps/ ::: stream http://radio.aporee.org ::: field radio https://aporee.org/fieldradio ::: miniatures for mobiles https://aporee.org/mfm/
locustream@lists.locusonus.org
-
aid -
Davis, Edward (Live Arts) -
Raphael Raccuia -
udo noll