hi Garth:
Thanks for posting this - I have had a Pi3B running with the Cirius board for several years (maybe 4 or 5 now), but I am moving it into a solar charged enclosure so I can move it away from the power source and make it more autonomous. I have used Pi Zeros for other installation applications but was not thinking about it in this application - however due to the reduced power consumption it would make sense for me to change me entire setup to a PiZero with the IOAudio board and so I am wondering if you have any details on how you got the PiZero working for Locusonus stream
as said, I don't have Pi zero experience yet. What you've listend to is a Pi3 + the IQAUdio Zero board: http://iqaudio.co.uk/hats/101-pi-codeczero.html
this board is for the pi zero, but obviously works nicely with a Pi3 I don't have a Pi Zero yet, but will so soon, then I can test how this performs.
great news is that there is an audio board with stereo mic-in /w PIP, working with a Pi3, Pi4 and hopefully Pi Zero.
Setup on the actual Pi3 is simple, the board is recognized by the kernel (Raspbian GNU/Linux 10, Linux raspi3 4.19.97-v7+) without any driver install needed.
the card is visible by the alsa: pi@raspi3:~ $ arecord -l **** List of CAPTURE Hardware Devices **** card 0: IQaudIOCODEC [IQaudIOCODEC], device 0: IQaudIO CODEC HiFi v1.2 da7213-hifi-0 [IQaudIO CODEC HiFi v1.2 da7213-hifi-0] Subdevices: 0/1 Subdevice #0: subdevice #0
So in a darkice config you can use it like: ... device = hw:IQaudIOCODEC sampleRate = 44100 bitsPerSample = 16 channel = 2 ...
as soon as I have a pi zero I'll try the board and will report. bests, Udo
Thanks in advance
Garth
ps. The stream seems quite low gain here in the USA
On Apr 21, 2020, at 08:56, udo noll un@aporee.org wrote:
hi Grant & all locustreamers,
maybe I missed that info, but the IOAudio website says about the pi-codecZero board (for the raspberry pi zero) that it is mono and doesn't work with a pi3 etc., and didn't he mention that it doesn't have PIP / bias voltage available?
anyway, it obviously works great with a stereo pair of Primo EM172. that means this board together with pi zero would be perfectly small, stereo and has low energy consumption. I'give it a try with a pi zero soon.
I'm just listening now, it's quite low noise, better sounding than the cirrus board. quite cool. check our my backyard within the next hour: http://radio.aporee.org:8000/live.m3u
bests, Udo
-- radio aporee 52° 29' 66" N, 13° 25' 26" E ::: maps https://aporee.org/maps/ ::: stream http://radio.aporee.org ::: field radio https://aporee.org/fieldradio ::: miniatures for mobiles https://aporee.org/mfm/
Locustream / Locus Sonus Streaming Project http://locusonus.org/ To unsubscribe, send a message to locustream-request@nujus.net with unsubscribe in the subject or the message http://nujus.net/cgi-bin/mailman/listinfo/locustream _______________________________________________
Locustream / Locus Sonus Streaming Project http://locusonus.org/ To unsubscribe, send a message to locustream-request@nujus.net with unsubscribe in the subject or the message http://nujus.net/cgi-bin/mailman/listinfo/locustream _______________________________________________