I'm using basic raspbian pi. I just downloaded it from installation page no probs - https://remote.it/download/
On Tue, 3 Aug 2021, 01:15 aid, oootini@yahoo.com wrote:
Thanks all for the thoughtful replies!
Sarah - I went to remote.it and tried to install it from AUR, where remoteit is not available for the 'armv6h' architecture, which lead me down an AUR rabbit hole, so I installed base-devel tools and debtap, and debtap to convert and install from page: https://downloads.remote.it/linux/v3.0.2/deb/pi/remoteit_armhf.deb, but then i discover deptap does not support armv6
phew! Did you install remote.it on an arch based rpi?
Aidan
On Monday, 2 August 2021, 17:32:15 GMT+1, Sarah Dal < dalrymple.sarah@gmail.com> wrote:
Hi All
I set my pi and my pc up with https://remote.it/ to access the pi ssh from home when it's out in the field on a 4G dongle - if you have good connectivity, it works really really well and was easy to setup
On Mon, 2 Aug 2021 at 17:28, Diarmuid Drew diarmuiddrew@gmail.com wrote:
It’s some time since I’ve used a dongle with my stream box. I seem to remember the way we connected to the stream box was to connect the laptop to the 4g dongle and then ssh or use the website of artos.local where artos is the name I gave my streambox. SSH pi@artos.local
Regards Diarmuid
On Mon, 2 Aug 2021 at 17:15, stéphane cousot locusonus@ubaa.net wrote:
Hi Aidan,
Unlike home networks, remote access behind a provider via a 4G Dongle (all cellular network in general) is complex to set up and unstable if your IP address is not static, SSH allowed on their network, etc.
About HTTP/SSH access, you probably also need to redirect all incoming external requests to your RPI on the E3372, I guess, if possible, like all other routers. May be try with custom ports for the remote access configuration in the admin interface, not random (by default).
best,
*stef*
On 1 Aug 2021, at 02:14, aid oootini@yahoo.com wrote:
Hi folks,
I have a problem with the a HUAWEI 4G Dongle E3372 which I am trying to configure with a streambox. the streambox is otherwise configured and tested as working. It's a rig with rpi zero, the latest 4.0-dev image, iqaudio card, and E3372 on OTG cable. I've updated the dongle firmware, turned on uPnP but can't connect ot the admin interface either over ssh or through the http admin interface at the stated IP:PORT address. The remote access works fine on my home network accessing the streamnbox from a phone outside the home network.
The stream is otherwise up, and streaming to the sound map.
Any ideas why I can'y access the admin or ssh remotely?
Thanks!
Aidan _______________________________________________ Locustream / Locus Sonus Streaming Project http://locusonus.org/ To unsubscribe, send a message to locustream-request@nujus.net with unsubscribe in the subject or follow instructions here https://nujus.net/cgi-bin/mailman/options/locustream _______________________________________________
Locustream / Locus Sonus Streaming Project http://locusonus.org/ To unsubscribe, send a message to locustream-request@nujus.net with unsubscribe in the subject or follow instructions here https://nujus.net/cgi-bin/mailman/options/locustream _______________________________________________
Locustream / Locus Sonus Streaming Project http://locusonus.org/ To unsubscribe, send a message to locustream-request@nujus.net with unsubscribe in the subject or follow instructions here https://nujus.net/cgi-bin/mailman/options/locustream _______________________________________________
Locustream / Locus Sonus Streaming Project http://locusonus.org/ To unsubscribe, send a message to locustream-request@nujus.net with unsubscribe in the subject or follow instructions here https://nujus.net/cgi-bin/mailman/options/locustream _______________________________________________ _______________________________________________ Locustream / Locus Sonus Streaming Project http://locusonus.org/ To unsubscribe, send a message to locustream-request@nujus.net with unsubscribe in the subject or follow instructions here https://nujus.net/cgi-bin/mailman/options/locustream _______________________________________________